Learning center / Ceiling acoustics

Hardware for hanging panels from wood plank and slat ceilings

Anchors, cables and safety for wood plank and slat ceilings.

2 minute read · Updated Nov 2026

Screw into the joists behind the planks; slats with gaps can hold panels above them.

  • Use at least two cables per cloud and two per baffle; four for clouds over 24 × 48 in.
  • Use anchors rated for at least five times the product weight overhead.
  • Use adjustable cable grippers so you can level each product.

Overhead installations should be checked by a qualified installer. Never hang from sprinkler pipes, ducts, conduit or the T-bar grid.