Learning center / Acoustics by building type / Home office

Ceiling acoustics for home offices

Clouds, baffles and ceiling tiles for home offices, and how much of the ceiling to cover.

2 minute read · Updated Nov 2026

The ceiling is often the largest untreated surface in home offices. With a ceiling around 8 ft, clouds hung 6–12 in below the ceiling or fabric ceiling tiles in the grid are the usual choice. Baffles need more height to hang without crowding the room.

Options

ProductBest whenNotes
Ceiling cloudsCeiling is flat and 8–14 ft highHang 6–12 in below the ceiling; air gap behind boosts low-frequency absorption.
Vertical bafflesExposed structure or ceilings above 12 ftAbsorb on both faces; spacing of 2–4 ft between rows is typical.
Lay-in ceiling tilesExisting 2 × 2 or 2 × 4 T-bar gridSwap standard tiles for fabric tiles, no new hardware.

How much to cover

Clouds or baffles covering about 20–40% of the ceiling area are a reasonable starting range for home offices. For a 12 × 10 ft room that is 24 to 48 ft² of product.

Read more in ceiling clouds under flat ceilings and baffles under open structure.

Coordinate with sprinklers, lights and HVAC before you hang anything, and check local code for suspended products.